ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 G3 with 2008 32bit Std

RHagen_1
Advisor

DL360 G3 with 2008 32bit Std

tried 2008 32bit installing from either an upgrade from 2003sp1 or fresh install of 2008 std 32bit VL with insight mgr 8.0 or 7.9 and I get the same results both times. the system boots up then cannot access the desktop either because the wrong video driver is loaded or the resolution is set to high for the attached monitor or kvm...have not tried accessing via ilo. cannot not access remote desktop from xp sp2 RDP. also in both cases the server hangs right a crcdisk.sys on safeboot and never goes into safeboot.

any ideas on getting around this?
3 REPLIES
Gary Antonio Benavides
Trusted Contributor

Re: DL360 G3 with 2008 32bit Std

It seems like Windows server 2008 32bit is not a recommend Operating System for the Proliant DL360 G3. There might not be HP Drivers for this OS.

Select operating system

» Microsoft Windows 2000
» Microsoft Windows NT 4.0
» Microsoft Windows Server 2003
» Novell NetWare 5.1
» Novell NetWare 6.0
» Novell NetWare 6.5
» Red Hat Enterprise Linux 2.1 (x86)
» Red Hat Enterprise Linux 3 (x86)
» Red Hat Enterprise Linux 4 (x86)
» Red Hat Enterprise Linux 5 Server (x86)
» Red Hat Linux 7.2
» Red Hat Linux 7.3
» Red Hat Linux 8.0
» SCO UnixWare 7
» Sun Solaris 8 Intel Platform Edition
» Sun Solaris 9 Intel Platform Edition
» SUSE Linux Enterprise Server 7
» SUSE Linux Enterprise Server 8
» SUSE Linux Enterprise Server 9 (x86)
» VMware ESX Server 2.1
» VMware ESX Server 2.5
» VMware ESX Server 3.0
If it's not fun, you're not doing it right
Mark Mills1
Occasional Advisor

Re: DL360 G3 with 2008 32bit Std

The new Smartstart 8.0 includes the option to install the Windows Server 2008 family. I do not have a DVDROM in my DL380 G3 for the Server 2008 DVD.

I tried to use a USB key (FAT32 format) with the install files copied off the DVD to it. I can see the USB key and SmartStart is prompting me to browse to the installation directory?

In W2K3 I would of pointed it to i386 but I am no luck when pointing it to any directory on the usb key with the 2008 OS install files????? I guess I will copy the ISO image to the USB key and see if that works?
KarloChacon
Honored Contributor

Re: DL360 G3 with 2008 32bit Std

hi

if you use usb key with W2008 and Smartstart

it's /mount/usb1/

regards
Didn't your momma teach you to say thanks!