DL360 G4, Disk problem, 0 logical drives found.

[shashi kanth]

I have DL360 G4, I am running Linux on it. I shutdown the box, removed the two ULTRA SCSI disks, and inserted back into the same position. Then i powered-on the box, it says 0 logical drives found. Then i thought some problem with the order that i inserted the SCSI disks, then i put into different order, but still i am getting same problem. The box is having only two disk slots.


Please anyone tell me, what is the solution for my problem ?

[Víctor Cespón]

Open the server. Behind the disks you'll see the SCSI backplane. Press it down.
Insert the disks with the server opened and make sure that the disks make good contact with the SCSI connectors.

[seehigh]

is the controller been recognized at post ?

[Pieter 't Hart · Accepted solution]

as it says "no logical drives found" first check if the physical drives are detected.
when prompted for "f8" go in the configuration menu for the integrated smart-array controller and check for the dected drives.