ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 G4 no display and fans operating at max speed

 
Mohamad KADRI
Occasional Advisor

DL360 G4 no display and fans operating at max speed

When plugging power cable (one pwr supply), all LEDs on board are in green color and fans operate at lower speed. When power on from front panel button, fans operate at max speed and only one LED is lit in green (Stdby pwr ok). Waiting for long time (>5min) but still no displat at all and the fans remain operating at max speed. Re-inserting memory, processor and cables, clearing NVRAM config and also with the same problem. Also: the CD drive does not takes power (LED does not lit and drawer remain locked).
1 REPLY
ramesh_naik_
Esteemed Contributor

Re: DL360 G4 no display and fans operating at max speed

Hi Mohamad,

Try reseating the power convertor module.
Also check whether the blanks are installed in the server wherever necessary.

Still the same issue, call HP and get the system board replaced.

Regards,
rmn