DL360 G5 and System Management Home-page

[LucaP.EOS]

I have installed Windows 2008 Server Core on my DL360 G5.
I installed SNMP Service.
I configure it via registry HKLM\SYSTEM\CurrentControlSet\Services\SNMP\Parameters
I installed support pack version 8.0.

I can't connect to System Management Home-page.
I try https://server_name:2381
I add a firewall rule, but I can't connect.


Regards,
Luca Passioni

[James ~ Happy Dude]

Hello Luca,
Try the IP address of the server instead of the Server name.
I have seen issues in resolving the server name.

Regards,

[LucaP.EOS]

Hello,
I already try with IP address.
HP System Management is supported on server core installation?

Luca

[KarloChacon]

hi

are you trying to connect remotely?
does it work locally? 127.0.0.1:2318?

what is the error message? page cannot be displayed?

SNMP traps properly configure?

regards

[LucaP.EOS]

Hi,
I can't try locally, it's a server core installation without internet explorer.
I tried from another computer.
The error is page not displayed.
Yes, SNMP traps is configured properly.

I attach netstat and tasklist screenshot.

Luca

[KarloChacon]

hi

Would you do me a favor to post SNMP values I would like to try that on 1 core server to test if we got the same issue

since I really don't know how to configure SNMP with Core

regards

[Aaron Blosser]

I have several DL360 G5's running with Server 2008 Core. The system management homepage (SMH) runs fine on them, but as you noted, the firewall rule would block it by default.

Are you sure the firewall rule you added is passing through port 2381 properly? You can probably test it out better by disabling the firewall entirely while you test it, then if it works, you know it's just a firewall rule you need to modify.

Messing around with the firewall on a Core install can be tricky. I usually allow remote firewall management and use a non-Core system to remotely manage the firewall using the GUI. Trying to do advanced firewall controls from the Core command line can get strange fast.

[KarloChacon]

hey

Luca

well that was in a test server but

I installed a Core no Smartstart CD so I had to installed SNMP manually, configured it and since that server did not have network I installed Firefox and it work so it worked locally which means It was fine

I am going to try to test ip from another PC tomorrow

I just installed W2008 Core I did not touch any security setting like firewall

so as Aaron says check firewall rule or test internally with Firefox or any other browser

regards

[LucaP.EOS]

Hi,
thank You for reply.
I will try to disable firewall and I will send You the SNMP Parameters.
I will update You in next days.

Luca

[Capel]

hi guys

interesting topic since I am in the same journey

my system homepage is working fine ADU, ACU, IML, NCU those tools when I try to open them I got no answer

anything special to have those hp tools up?

regards