ProLiant Servers (ML,DL,SL)
1753960 Members
7419 Online
108811 Solutions
New Discussion юеВ

Re: DL360 G5 does not reach POST

 
JohnRichardson
New Member

DL360 G5 does not reach POST

I was wondering if anyone knew what the small row of LEDs on the system board indicate.

It is a row of 8 of them.
When powering on the server, within 5-10 seconds these small LEDs all flash on, then off again.

Then the last 2 flash on and off an amber colour over and over.

The fans do not have the chance the start properly, and the server never reaches POST.

 

Could someone enlighten me to what these LEDs signify?

4 REPLIES 4
Priyansha
Valued Contributor

Re: DL360 G5 does not reach POST

Hi,

 

Bring the server to minmum configuration, uninstall the following components, if installed:

  • All additional DIMMs
  • Leave only the minimum required to boot the server - either one DIMM or a pair of DIMMs.
  • All additional cooling fans, if applicable
  • All additional power supplies, if applicable (leave one installed)
  • All hard drives
  • All optical drives (DVD-ROM, CD-ROM, and so forth)
  • All optional mezzanine cards
  • All expansion boards
  • Clear The NV Ram.

Links
User guide : http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00710376/c00710376.pdf

Guided Troubleshooting : http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121486&lang=en&cc=us

 

 

 

Thank you,
Was the post useful? Click on the white KUDOS! Star.
For HP Guided Troubleshooting; https://support.hpe.com/connect/s/?language=en_US
Murali_V
HPE Pro

Re: DL360 G5 does not reach POST

Hi, 

 

In addition to the above steps, refer the following Document: 

No POST / POST Error Troubleshooting Steps: 

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c03313823

 

Also, in Guided Troubleshooting : http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121486&lan...

 

Select: Diagnosis / Troubleshooting> No POST / POST Error

 

Thanks and Regards, 

Murali Mohan 

Was this post useful?

Accept or Kudo

Johan Guldmyr
Honored Contributor

Re: DL360 G5 does not reach POST

As for your leds.. (an attempt to answer your question) - you can find some information about them in the Proliant Troubleshoot Guide. I believe the ones you are referring to are called port 84/85.

http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/DL360-G5-not-not-getting-out-of-post-Fans-100-and-no-video/td-p/5298137

Might help you.

Murali_V
HPE Pro

Re: DL360 G5 does not reach POST

Hi, 

 

Port 84/85 LEDs are not applicable to this server, its available in few server models (Ex: DL580, DL585, DL785 G5, ML570 with different generation servers.. .etc.). 

 

About the LEDs which you are refering, you may refer the HP ProLiant DL360 Generation 5 Server Maintenance and Service Guide:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00710376/c00710376.pdf

 

Refer page number 75 for System board components, if these LEDs are ment for user troubleshooting you will find the information. Also refer page number 76 for HP Systems Insight Display and LEDs for troubleshooitng. 

 

 

Was this post useful?

Accept or Kudo