ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 G5 terminal issue

 
Stephen Moccio
Occasional Visitor

DL360 G5 terminal issue

I've setup this system to use serial console redirection. Everything works fine except one odd case. With a serial console connection I can see the POST messages and then prompted with f1, f9, f12 and the corresponding esc codes. When I choose f12 to to PXE boot my boot msg file writes one line at a time, each over writing the previous line. So in the end, instead of seeing my options I only see the last line.

Has anyone come across this?

Thanks for your help.
2 REPLIES
KarloChacon
Honored Contributor

Re: DL360 G5 terminal issue

maybe this applies to you

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00897427〈=en&cc=us&taskId=101&prodSeriesId=1842750&prodTypeId=15351

well you can try updating System ROM even fit the advisory above it is not your case
Didn't your momma teach you to say thanks!
Stephen Moccio
Occasional Visitor

Re: DL360 G5 terminal issue

Thanks, I checked the bios and am running the latest. This is only a problem with the tftpboot menu that is displayed. POST messages prior to that and the installation messages after that are all fine.