DL360 G6 / G7 Memory Errors

[jgonzalez]

We continue to receive:

Corrected \ uncorrected Memory Errors Detected The errors have been corrected, but the memory module should be replaced. Value 0 for CPU means memory is not Processor based

Have applied the following BIOS update:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=4091408&swItem=MTX-6fe187c984bc43a4bf97f99715&prodNameId=4091409&swEnvOID=4064&swLang=13&taskId=135&mode=3

but continue to receive random memory errors on only these model servers. SIM reports different dimm slots on same server in some cases. I do not believe we have that many bad dimms. Any help would be greatly appreciated, thank you.

[Jan Soska]

Hello,
As mentioned in fixes in bios you aplied - the problem is caused by Intel Xeon 5600 cpus. If you have such, contact HP support and explain you still have the problem and wand final solution.

Jan

[Pavel Bradut Boghita]

You may want to reset the NVRAM (switch 6 on the board) after replacing the memory module. Had the same issue replaced memory, replaced cpu, the error was still present until I reset the NVRAM, no errors since.