HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 G6 System Health LED

 

DL360 G6 System Health LED

I have a DL360 G6 server as a VMWare Vsphere host. The System Health warning LED is flashing red, but I don't know how to tell what component is having a problem. The server has no harddrives but is using the internal USB port as the drive for the Vsphere OS. I also checked the SID LED display for fans, memory, cpu's, etc but the LED's are all off. Any thoughts on how I can figure out the System Health warning without powering down or rebooting the server?
1 REPLY
Michal Kapalka (mikap)
Honored Contributor

Re: DL360 G6 System Health LED

hi,

if you are running HP Vmware 4 usb/flash image,

you could use SMH to connect to the server remotely via browser and check the healt status of you proliant server.

mikap