DL360 G6 and RDP

[TConn]

I get a "Unable to boot to Windows automation status code 116" error when trying to image a DL360 G6 using RDP 3.82 - 6.9, build 355, SP1.
This is our first G6.

Does anybody have any ideas?
I was thinking a driver problem but can't find any information in the HP KB yet.

Thanks,

Terry

[TConn]

I have updated the NIC and Storage drivers from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3884320&prodTypeId=15351&prodSeriesId=3884319&swLang=13&taskId=135&swEnvOID=1005#93211 but still no luck.

Any suggestions, without being too rude?

[asqwq]

hi
if your os is windows use sp2 microsoft
and update with psp all of the driver & bios
best regards

[TConn]

Yes.

I have Edited the Boot Image and updated the Windows PE Hardware Device Drivers.
I see that this,HP NC-Series Broadcom 1Gb Multifunction Driver for Windows Server 2003, driver is loaded.

[asqwq]

hi
do you have any problem?

dont forget assign point

best regard

[TConn]

RDP is working just not with the DL360 G6.

Is anyody is using G6es yet with RDP and having problems?

[Graham Land]

Hi Terry,

I've hit a similiar issue today.
Did you ever get a resolution?

Cheers,
Graham.

[TConn]

Yes. Update RDP to ver 3.83.

Cheers,

Terry