ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 G6 freezes on boot time

Karma Tshulthrim
Occasional Contributor

DL360 G6 freezes on boot time

Can anyone please help me out to resolve this issue....When i turned on the server....it halted when the smart controller started initializing the logical volumes.....need help on it ASAP.
3 REPLIES

Re: DL360 G6 freezes on boot time

Hi karma,

Check the motherboard and the cache memory module. If the problem persists, replace the motherboard.

Regard.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Karma Tshulthrim
Occasional Contributor

Re: DL360 G6 freezes on boot time

Thanks a lot....will try.
Mauricio Salas
Frequent Advisor

Re: DL360 G6 freezes on boot time

When it took a long time to initialize is because an Smart Array issue or a cache issue, try to boot without the cache, if you have a raid 5 will tell you that is not able to boot, but is good because it means that is a fail cache, but if it is not the cache, it will tell you: Smart Array failure and it will take a long time again, so replace the Smart array (usually the Systemboard because it's embedded)