ProLiant Servers (ML,DL,SL)

DL360 G6 installing a Backplane

 
madman6
Occasional Visitor

DL360 G6 installing a Backplane

I installed the second backplane into the server, connected the power and mini sas connectors, ok.

Plugged in the hdd to the new backplane and then powered on the server.

The hdd lights came one but it stays a constant red light.

1 REPLY 1
Vinod_R
HPE Pro

Re: DL360 G6 installing a Backplane

Hi 

Please check the hard drive backplane cabling, please refer DL360 G6 Server Maintenance and Service Guide from page number 77 & so on

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c01704762&docLocale=en_US


HPE ProLiant DL360 G6 Server - Spare Parts

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c01714771

Primary hard drive backplane assembly and cable, bottom 532148-001

Optional hard drive backplane assembly and cable, top4 532147-001

Please refer server QuickSpecs ( HP ProLiant DL360 Generation 6 (G6)) for supported drives, drive backplane & cables

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04284365

If still issue persist then, I would suggest that log a support case with HPE technical support team for further troubleshooting in this case.

Thanks & Regards,

Vinod


I work for HPE

Accept or Kudo