DL360 G7, Windows Server 2019, cannot add drives

[davesav]

DL360 G7, Windows Server 2019:  all is running fine including HyperV and guest services, and joined to my lab AD domain.   But when trying to add more physical drives they are not recognized.   I have since learned that Windows 2019 is not officially supported by HP, but all fine so far.   Some suggestions for download some other drivers (for ILO etc), but the installers wont run.  Anyone have suggestions or advice?

[support_s]

System recommended content:

1. Microsoft Windows Server 2019

2. HPE Factory-Installed Operating System Software for Windows Server 2019 Standard User Guide

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

[davesav]

OK stupid me-  literally only had to get into the ILO manager in the BIOS (using F8) and make the logical disk visible in the BIOS, then use Disk Manager in Windows to initialize and partition it.  

[Parvez_Admin]

Glad to know that you found the solution !!