HPE Community
ProLiant Servers (ML,DL,SL)
1752800 Members
5614 Online
108789 Solutions
New Discussion

Re: DL360-G7 is not booting

 
it61066
Frequent Advisor

‎11-24-2010 07:07 AM

‎11-24-2010 07:07 AM

DL360-G7 is not booting

Hello,

We have a normal DL360-G7 with one processor and 2 X 4GB RAM which is working fine. We have ordered and installed a processor upgrade kit and installed with the optional Fan but the server didn't boot: it still boot with one processor.

Any one can proof if it is mandatory to install memory for the second processor or the banks of the first one can be shared with the second processor?

Thanks.
HPE ASE Proliant-Synergy & Storage Certified Engineer
Clustering & Virtualization Support (Microsoft & Vmware)

0 Kudos
Reply
1 REPLY 1
Jake Mason
Advisor

‎11-25-2010 08:45 PM

‎11-25-2010 08:45 PM

Re: DL360-G7 is not booting

I'm assuming that you are running dual procs now? I will also assume they are identical. If so, take out the first/original CPU and put the new one in there. If it still doesn't boot, its a CPU issue. If it boots, then at least your CPU is good. If it doesn't boot, check for bent pins as well. Also, swap VRMs if it doesn't boot by itself.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.