ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 G9 - Stuck on HPE logo when boot to WinPE

SOLVED
Go to solution
Highlighted
onma
Visitor

DL360 G9 - Stuck on HPE logo when boot to WinPE

Hello,

We've got 10 Proliant DL360 Gen 9 servers and I would like to deploy system image over PXE boot and Microsoft Deployment Toolkit (latest version) from deployment share.

My problem is, that every time when server loads lite touch wim file, it stuck on splash screen with HPE logo. The circle just rotate one or two times then it freeze (image in attachment).

I've tried to download and inject all drivers from HPE Scripting toolkit but it does not work. I've also tried PXE boot and install into standard WS 2016 image and it works so I assume that problem is only in WinPE.

Anybody has similar problem? Can you help me wit that?

Thanks for all replies.

2 REPLIES
Jimmy Vance
HPE Pro
Solution

Re: DL360 G9 - Stuck on HPE logo when boot to WinPE

Refer to my posting in this thread

https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/Windows-Server-2016-1709-can-t-installed-on-HP-Proliant-DL380/m-p/6989787#M160007




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
onma
Visitor

Re: DL360 G9 - Stuck on HPE logo when boot to WinPE

OK, thanks for information