ProLiant Servers (ML,DL,SL)

Re: DL360 Gen10

 
HewPe
Occasional Visitor

DL360 Gen10

Hi there, we have a DL360 Gen 10 here. We ordered the wrong hard drives. We have 6x M.2 SSDs. What options do we now have to run all 6 plates? Riser board? Is there no adapter to use the slots at the front?

4 REPLIES 4
90Ninety
Advisor

Re: DL360 Gen10

m2 to ssd.jpg

 

 

You caan get M.2 to Sata housing , lots on ebay/amazon

Torsten.
Acclaimed Contributor

Re: DL360 Gen10

Makes no sense.
 

You neef a carrier that fit the server like this:
P06607-B21

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
HewPe
Occasional Visitor

Re: DL360 Gen10

yes i know the carrier but i need it empty do you know where i get it? 

 

m.2 to sata is good but where do i put the cases in? 

Torsten.
Acclaimed Contributor

Re: DL360 Gen10

According to partsurfer there is a spare part available: 830452-001


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!