ProLiant Servers (ML,DL,SL)
1748210 Members
2964 Online
108759 Solutions
New Discussion

DL360_Gen9の物理メモリ交換対応について { DL360_Gen9 support for physical memory exchange}

 
kyosuke
Occasional Contributor

DL360_Gen9の物理メモリ交換対応について { DL360_Gen9 support for physical memory exchange}

お世話になっております。今回、既存システムのリソース増強にあたり、DL360_Gen9の物理メモリを増設します。

【現状】

物理メモリ8G_1本で運用している

【対応】

容量増加に伴い、16Gのメモリを1本付け足す。

【質問】

・メモリを追加するマザボ上のスロットは、下記どちらの方が推奨等ありますでしょうか。

容量によって刺すスロットの場所に指定等あるのでしょうか。

案1.12A=8G_9B=16G

案2.12A=16G_9B=8G

※基本的にどちらでも問題ない認識ですが相違ないでしょうか。

【参考】

https://www.hpe.com/content/dam/hpe/shared-publishing/images-norend/jp/pdf/system/dl360gen9.pdf

HPE ProLiant DL360 Generation 9 _p65

Google Translate

DL360_Gen9 support for physical memory exchangeWe become indebted to.
This time, in order to increase the resources of the existing system,
we will increase the physical memory of DL360_Gen9.
【Current status】
Operates on 8G_1 physical memory

【Correspondence】
With the increase in capacity, add one 16G memory.

[Question]
• Which of the following slots is recommended for the slot on the motherboard to add memory?
Is there a designation etc. for the location of the stab slot depending on the capacity?

Plan 1. 12A = 8G_9B = 16G
Plan 2. 12A = 16G_9B = 8G

*Basically, there is no problem in either case, but is there any difference?

【reference】
https://www.hpe.com/content/dam/hpe/shared-publishing/images-norend/jp/pdf/system/dl360gen9.pdf
HPE ProLiant DL360 Generation 9 _p65

 

1 REPLY 1
Shwetha3
Frequent Advisor

Re: DL360_Gen9の物理メモリ交換対応について { DL360_Gen9 support for physical memory exchange}

Hello kyosuke ,

Please use the HPE Server Memory Configurator while upgrading memory , below is the link for the same 

https://memoryconfigurator.hpe.com/ddr4memoryconfig/home/legal

As per the configuration mentioned on you post , Plan 2. 12A = 16G_9B = 8G would be ideal. 

 

Regards,

Shwetha Murthy 

 

I am an HPE Employee