ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

[DL360] No POST No Video

Ryuji Ishisako
Occasional Visitor

[DL360] No POST No Video

I don't get POST and Video after using System Configuration Utilities.
The LED is green and the fan is spinning.

I don't remember how I changed SCU...
I tried to start maintenance mode by switch on system board, so the system succeeded to startup once.
But after restart, the system could not startup anymore.
Can I roll back the system as factory default?
Prashant (I am Back)
Honored Contributor

Re: [DL360] No POST No Video


Clear teh NVRAM That will clear it out

Prashant S.
Nothing is impossible
Ryuji Ishisako
Occasional Visitor

Re: [DL360] No POST No Video

Thank you for your reply!

I tried to clear NVRAM by turning on system configuration switch(maintenence), but I couldn't get any response (POST & Video) from system now.

Can I clear NVRAM by other methods?
Paul Lessor
Occasional Contributor

Re: [DL360] No POST No Video

I just tried to clear the NVRAM on a DL360 by using the maintenance switch. Now the CR1 LED is lit and the system will not boot.

Any ideas here?

Terry Hutchings
Honored Contributor

Re: [DL360] No POST No Video

The top cover should show the led locations in this server. What does CR1 equate to? I doubt it has anything to do with running the system configuration utility and is likely more of a coincidence.
The truth is out there, but I forgot the URL..