DL360 Raid 1+0 Mirror problems

[KarloChacon]

hi

"Is there any way to overwrite/update the RIS table without breaking the ACU? and rebuild the failed mirror HDD without any restore. "

no there is no way when the RIS tables are corrupted the only way to fix it is backup the data fron the good HDD and rebuld the RAID level again

regards

[James ~ Happy Dude]

Mahesh,
if possible post the ADU report, we may be able to check whats wrong.

;)
James.

[Mahesh Shah_3]

James,

Attached you will find the ADU report.

Thank you for the follow-up.

Mahesh

[James ~ Happy Dude]

Hello Mahesh,
Sorry for the delay;

1) You need to update the PSP to 7.9
http://h18023.www1.hp.com/support/files/server/us/download/27534.html

2) SCSI Port 1 Drive ID 0 has failed;
replace it.

3) Your Smart array controller 6i is running on an old firmware;

I will suggest, after you replace the drive, & the rebuild is complete, download firmware maintenance cd 7.9 from:
http://h18023.www1.hp.com/support/files/server/us/download/27783.html
& boot from it;

Regards,
James.

[Mahesh Shah_3]

I really appreciate your help, but unfortunately when I replaced failed HDD on the DL360 G4 server it BSOD and could not able to bring server online for any PSP or Firmware updates, looks like RIS table is corrupted.

Basically, I was able to clone the server from similar server, using one of the mirror drives, remove network cable, changing server name, IP address, join the domain and then bring online.

In the future, I will try to update the PSP first, then replace the drive and last Firmware updates.

Thanks.
Mahesh