ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 and DL320 Teaming fails when activating trunking on switch

Rainer Mittenzwey_2
Regular Advisor

DL360 and DL320 Teaming fails when activating trunking on switch

I teamed two fast ethernet cards in DL320 and DL360 with latest patches.
Compaq teaming looks well on the servers.
When i enable trunking on the switch (Allied Telesyn, Rapier24), the teaming looses network.
What is my mistake??
Thanks
Rainer
2 REPLIES
Sunil Jerath
Honored Contributor

Re: DL360 and DL320 Teaming fails when activating trunking on switch

Hello Rainer,
Have you tried using Smart Start Version 6.20 for the NIC teaming drivers?? If not then give it a try.

Regards,
Rainer Mittenzwey_2
Regular Advisor

Re: DL360 and DL320 Teaming fails when activating trunking on switch

Thanks for your answer. Network still was offline after enabling trunking, but once disabling and enabling network again helped.
It now works in load-balancing mode.
Regards
rainer