HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 boot problem

 
Lionel_11
Occasional Advisor

DL360 boot problem

Hello
I switch on the server and it start its initilization ( spinning disk ..etc ), start to boot for example from the CD and power down by hilself. It s not the install as it's only 10 or 15 sec after the begining of install and it occurs as well when I start from a floppy
Any idea ?
( maybe a clue : I forgot one time to put the iron cooler on the cpu and i noticed that the server just start and stop without displaying the bios infos. Is there any security thing which can protect the cpu as the cooler seems not to be the original ones ? )
Thanks in advance !!!
3 REPLIES
Lionel_11
Occasional Advisor

Re: DL360 boot problem

ok, but before bying the cooler, I want to be sure that the reason of the stop is this bad cooler.You confirm that the DL320 stops when the cooler is not correct ( so I guess, when the temperature is too high ? )
What is the exact reason ?
thanks
Lionel_11
Occasional Advisor

Re: DL360 boot problem

The problem is solved. It was a temperature problem. I put some thermic paste and everything runs !!