HPE Community
ProLiant Servers (ML,DL,SL)
1753776 Members
7008 Online
108799 Solutions
New Discussion

DL360 needs input at boot to continue...

 
Ayman Altounji
Valued Contributor

‎06-10-2002 04:00 PM

‎06-10-2002 04:00 PM

DL360 needs input at boot to continue...

This DL360 has been installed with W2K. But last night the power was shut down due to maintenance and this server didnt come back online....

When i look at the console it stops right after PXE has finished. It asks you to press F1, F9 or F10..... I press F1 to continue... Any idea how to get the server to continue without the need to press F1 ?
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎06-10-2002 04:00 PM

‎06-10-2002 04:00 PM

Re: DL360 needs input at boot to continue...

Hi
If you have a F1 choice, that probably indicates that there is an error message at post
Or else to desactivate F1 prompt, boot to F10 partition and hit Ctrl + A to access Advanced mode. You will find the option to desactivate F1 prompt

Vic
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.