Showing results for 
Search instead for 
Did you mean: 


Augustus Payne
Occasional Contributor


I have a DL360 server that will not accept two disks at the same time. When I insert one disk in either bay, it works fine. But when I insert the two disks together, the disks crash all the time. It doesn't matter whether I configure them on the same array or different array. Nor does it matter if I configure any RAID at all. They just won't work together. They usually lock up just when Smart Start copying files to the system partition and all I get is a flashing light on both disks.
Respected Contributor

Re: DL360

Post your server generation. Use Array Diagnostic Utility from SmartStart CD for testing your raid subsystem. Check ACU for disk status
Oleg Koroz
Honored Contributor