HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360G3 Lilo help

 
SOLVED
Go to solution
DaveVPL
Advisor

DL360G3 Lilo help

Ok please go easy......system board has been changed and now the lights out does not work, what is the correct config method after a board change.

Many thanks
3 REPLIES
Igor Karasik
Honored Contributor
Solution

Re: DL360G3 Lilo help

During POST select "F8" option (something like "Press F8 to configure ILO").
You don't need password to access ILO configuration with "F8" and you can add/remove users in such way and define TCPI/IP configuration as well.
DaveVPL
Advisor

Re: DL360G3 Lilo help

ok many thanks....I was not there when the board was changed...we have a hardware contract....does changing the bord normally throw up this prolem?
Igor Karasik
Honored Contributor

Re: DL360G3 Lilo help

>>>does changing the bord normally throw up this prolem
No problem here, just fact that ILO resided on system board and ILO "default" password generated by using server serial number defined on system board. When system board changed you have "new" ILO, new ILO password (and you lost ILO logs from previous system board)
BTW, see this advispry as well:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=PSD_CN0178W