ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360G4, 6i & 642

ed langone
Occasional Visitor

DL360G4, 6i & 642

Hi folks. I've got a DL360 G4, with embedded 6i. I set it up, works fine. I then added a 642 controller. At first, put it in, at POST it gives me a I/O ROM error. Then, Windows will not load driver. ACU doesn't see it at all. so, it's a new server, so I just smartstart it again with the 642 in there - server video never shows up - it hangs in (I guess) pre-POST. If i pull the 642 out it's fine. Help!!

Ed
2 REPLIES
Oleg Koroz
Honored Contributor

Re: DL360G4, 6i & 642

System ROM is Up to date ?
642 ? firmware ? also it used for support of external drives only.

Pieter 't Hart
Honored Contributor

Re: DL360G4, 6i & 642

maybe just a DOA.
we had a working 2xDL580 windows-cluster.
added each system a new raid controller one worked fine, other was seen in bios and OS but could not be used.
windows says "disabled" beacuse of hardware conflict.
bios reported some "pci conficuration error"
firmware updates were no solution, swapping pci-slots neither.
finally card was replaced by HP-engineer : all OK.

Pieter