DL360G4p memory supported configuration

[IS.Danil]

Hi all

I installed two dual rank DIMM(p/n - 345114-051) in slot 1A, 2A and two kit(p/n 343055-B21)  i.e.
four DIMM 512MB single rank. And my server starts periodically, in case of fail it show amber led near dual rank DIMM(slots 1A, 2A) .

Is it correct configuration?

[Johan Guldmyr]

Hello,

http://h18000.www1.hp.com/products/quickspecs/12166_div/12166_div.html#Memory

1A 2GB dual rank
2A 2GB dual rank
3,4,5,6 512MB single rank

ProLiant DL360 G4p, A maximum of 4, 2-rank DIMMs can be populated. If you plan to mix DIMM types, 2-rank DIMMs must be installed in the first bank, 1 rank DIMMs can then be installed in subsequent banks.

Then further below there is a table.

It looks like the smaller DIMMs and the ones in single rank should be in slots 1-4 and that the larger ones should be in 5-6 slots.

[IS.Danil]

So

is it correct configuration?

1A 2GB dual rank
2A 2GB dual rank
3,4,5,6 512MB single rank

[Johan Guldmyr]

I just wrote that down to get an overview how you have it set up at the moment.