DL360e G8 and HDD DG146BB976 not HPE

[Courage2000]

Hello!

I have an refurbished DL360e G8.

HP ProLiant DL360e G8, 1U, 2x Intel Octa Core Xeon E5-2450L 1.8 GHz-2.3GHz, 24GB DDR3 ECC Reg, 2x 146GB SAS/10k, Raid Controller HP SmartArray P420/1GB, iLO 4 Advanced

The haid has the newst FW

One HDD crashed (Was a Seagate ST9146802SS).

The HDD is a HP DG146BB976 (now with the newest firmware)

The problem is that in ILO I get this, and the LED on the caddy is dead after boot:

Physical Drive in Port 1I Box 1 Bay 3

• Status  Degraded (Not authenticated) Serial Number info erased Model DG146BB976 Media Type HDD Capacity 146 GB Location Port 1I Box 1 Bay 3 Firmware Version HPDF Drive Configuration Configured Encryption Status Not Encrypted

The HDD is new and seems to be working in a RAID array.
Should I worry?

https://imgur.com/a/zMPMEd1

[SanjeevGoyal]

Hello,

I hope you are doing well.

I would request you update the server with the latest bios & firmware because I observed so many issues resolved after updates. Hard disk caddy needs to be replaced If the issue still persists after updates.

 I would request do not to use none-HPE components with the HPE servers.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

[Courage2000]

I do believe that I have the latest ILO, BIOS and RAID fw.

I've also swapped caddyes and no good news.

[SanjeevGoyal]

Hello,

I would request you log a case with the HPE for further inv investigation.

If you feel this was helpful please click the KUDOS! thumb below! ,

Regards,

.