ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360p G8 and partitioning issues

 
Highlighted
s91066
Occasional Advisor

Re: DL360p G8 and partitioning issues


@Jimmy Vance wrote:
anaconda will see the USB key as a /dev/sdX device, since you booted from it, probably will identify as sda..

The problem is that anaconda has no way to determine which is target HDD.  In any case, I will try to boot from the USB again and see how it is mounted.

Jimmy Vance
HPE Pro

Re: DL360p G8 and partitioning issues

Correct, annaconda will try to use all devices it sees as a disk.  If your doing a manual installation, keep in mind, even if you direct the installer to use /dev/sdb as the installation drive, you also need to modify the boot loader settings as the installer will put it on /dev/sda. If you are using a kickstart file you can tell anaconda to ignore /dev/sda

 

Another option is to setup a PXE/ Network repository and do the installation over the network instead of booting from USB

No support by private messages. Please ask the forum! Accept or KudoI work for HPE