ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360p Gen 8 Boot up

 
SOLVED
Go to solution
jerrydv
Occasional Advisor

DL360p Gen 8 Boot up

Hi,

 

I have a Gen 8 DL360p new server that will not boot  basically I think the server tries to go thru post but comes back with a system red blinking light and also the psu lights come up. I know the psu are OK because I tried then on a different server (DL360p gen8). Any help would be greatly appreciated.

4 REPLIES
Suman_1978
HPE Pro

Re: DL360p Gen 8 Boot up

Hi,

 

Just go through basic troubleshooting:

Remove additional RAM.

Remove any PCI cards if installed.

Disconnect any external devices that are not necessary for booting.

If server has two processors, remove the second processor and test with only one processor.

Clear NVRAM from System Maintenance Switch.

 

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

jerrydv
Occasional Advisor

Re: DL360p Gen 8 Boot up

I have done all the troubleshooting you suggested what is interesting is the server always stops with 2 psu lights on (on the control panel) and the system light blinking red. Also before the system halts I have notice the uid comes on and blinks 3 times. Thanks again for your help.

Torsten.
Acclaimed Contributor

Re: DL360p Gen 8 Boot up

Anything in IML? Check from ILO.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
jerrydv
Occasional Advisor
Solution

Re: DL360p Gen 8 Boot up

Thank for you help it ended up being a motherboard issue.