DL360p - reason for high FAN speed

[mwiora]

Hi all,

my DL360p remains at 39% FAN Speed, while another one (also a DL360p - even a more powerful one) goes down to 19% - I would like to know the reason for the higher FAN Speed and how to regulate it down.

Steps I tried:

- Installation of latest BIOS

- Installation of latest Firmwares available (iLO)

- Installation of latest WIndows Updates

- Installation of latest HP Management Software via SUM

- Performing iLO factory reset

The iLO logs do not show any issues and the temperatures are nearly the same...

Any idea?

Cheers,

Matthias

[Jimmy Vance · Accepted solution]

---

@mwiora wrote:

Hi all,

my DL360p remains at 39% FAN Speed, while another one (also a DL360p - even a more powerful one) goes down to 19% - I would like to know the reason for the higher FAN Speed and how to regulate it down.

Steps I tried:

- Installation of latest BIOS

- Installation of latest Firmwares available (iLO)

- Installation of latest WIndows Updates

- Installation of latest HP Management Software via SUM

- Performing iLO factory reset

The iLO logs do not show any issues and the temperatures are nearly the same...

Any idea?

Cheers,

Matthias

---

Do you have any 3rd party PCIe devices installed?

Which disk controller are you using?

Is Enhanced Cooling enabled in RBSU?

[mwiora]

YOU are my hero.....

There was a HPE NC365T Card installed and since I removed this card all FANS are running 19% - beautiful!

THANKS!

Cheers,

Matthias