HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 1Ghz installation of Windows 2003 hangs

 
John Bakker
Occasional Visitor

DL380 1Ghz installation of Windows 2003 hangs

I'm installing Windows 2003 on a DL380 G1 (P17). Have done the Rom Bios upgrade. In Rom Bios the OS is set to "Other". The system hangs in Windows Setup with message: "Setup is starting Windows". Any suggestions?
5 REPLIES
Jorge Pons
Trusted Contributor

Re: DL380 1Ghz installation of Windows 2003 hangs

Hi

try to install with another O.S. media, another O.S. like W2K, etc...

Are you installing with SmartStart?

Jorge
John Bakker
Occasional Visitor

Re: DL380 1Ghz installation of Windows 2003 hangs

I already tried "NT" but that didn't change anything. W2K is not in the options list.
Jorge Pons
Trusted Contributor

Re: DL380 1Ghz installation of Windows 2003 hangs

Ok
Have you tried to install that O.S. media over other machine?
Your DL380 G1, have the minimal requirements: memory, processor?

Jorge
e4services
Honored Contributor

Re: DL380 1Ghz installation of Windows 2003 hangs

You need to follow the Manual Install Procedure, clearing the system, reconfigure, and install with the required drivers.
Hot Swap Hard Drives
Mike Rice
Occasional Visitor

Re: DL380 1Ghz installation of Windows 2003 hangs

I also am attempting to install Server 2003 on a DL380 G1 and am getting the same error. I have updated the BIOS and the Array driver but it made no difference. Have you resolved the issue yet?

Thanks,

-Mike