ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380(933mhz) and NC7131(gig) Issues

 
Justin Knipstein
Occasional Advisor

DL380(933mhz) and NC7131(gig) Issues

Problem: Transmits but does not receive

I have tried:
-Rompaq ver 17
-Disable 0ld nic, enable new, reboots a plenty
-New Cable, New Port
-Different NC7131 card
-PCI Slots 2 and 3. Slot 1 is taken by U320 SCSI controller

Any thoughts?
1 REPLY
Brian_Murdoch
Honored Contributor

Re: DL380(933mhz) and NC7131(gig) Issues

Hi Justin,

If it's a driver issue, try the Intel driver kit from the following link. The NC7131 uses the Intel 82543GC chipset and these drivers work with the NC7131.

Here is the link to the Windows 2000 driver kit.
http://downloadfinder.intel.com/scripts-df/Detail_Desc.asp?agr=Y&Inst=Yes&ProductID=986&DwnldID=4233

You can obtain other OS kits by selecting the 82543GC link at the bottom of the page above.

I hope this helps,

Brian