ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 Blue Screen Trap - BugCheck, STOP 0x0000001E

 
SOLVED
Go to solution
mattie keane_1
Occasional Visitor

DL380 Blue Screen Trap - BugCheck, STOP 0x0000001E

I want to check the hardware to see if it causes the Blue Screen Trap. I run W2K on a DL380 with 1 logical array on a 5i Array Controller. What diagnostic utilities are available to check out the hardware?
3 REPLIES 3
juan quesada
Respected Contributor
Solution

Re: DL380 Blue Screen Trap - BugCheck, STOP 0x0000001E

hi,

the dl380 g2 is the one with the embedded 5i controller, the dl380 g3 is the one with the embedded 5i plus controller, so, to test the HW you can boot from sscd 7.70 go to maintain server and run insight diagnostic with 3 loops custom test)option. it will display the results by telling you if the component failed or passed

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316587&prodNameId=3288128&swEnvOID=181&swLang=8&mode=2&taskId=135&swItem=MTX-02ce93e14c1f41b58c204be75d

regards,
juan quesada
Respected Contributor

Re: DL380 Blue Screen Trap - BugCheck, STOP 0x0000001E

and for the BSOD check which of this conditions is the most likely for your system

http://support.microsoft.com/search/default.aspx?query=0x1e&catalog=LCID%3D1033&pd=&spid=1131&mode=r&lsc=0
mattie keane_1
Occasional Visitor

Re: DL380 Blue Screen Trap - BugCheck, STOP 0x0000001E

Hi juan,

Thanks for the 2 responses. I am checking out the Microsoft and SmartStart info link which you sent. By the way, the server is a G3.

Mattie