ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 Boot problem

Frank_192
Occasional Visitor

DL380 Boot problem

I have a raid controler that boots sometimes and then when you try restarting it trys to boot but then gives error message that raid controler is locked will disable until it is unlocked.

but if you leave it off for a day it will then boot back up.

this is on a 5i raid controler with windows 2000
3 REPLIES
JohnWRuffo
Honored Contributor

Re: DL380 Boot problem

Frank:

Did you reciently update the bios on the controller?

Did you update the bios offline with a diskette or with SmartStart or did you do it "Online" from the O/S?

You may need to re-flash the controller with the bios, but use offline:
http://h18007.www1.hp.com/support/files/storage/us/download/20142.html
Use your Smart Start CD and select the ROM Maintenance. Then select "Supplemental Disk", then use disk.

Let us know if this clears the error? -john
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
Prashant (I am Back)
Honored Contributor

Re: DL380 Boot problem

Hi Frank,

What is the error reported under IML please check the same.
As suggested above update the BIOS and Controller driver.

Regards,
Prashant S.


Nothing is impossible
Vijay_44
Honored Contributor

Re: DL380 Boot problem

Is this a DL380 G2?? If so try and reseat your controller. Its located under the PCI riser.
There’s your problem!!! This thing is set to EVIL!