ProLiant Servers (ML,DL,SL)
1752738 Members
5228 Online
108789 Solutions
New Discussion юеВ

Re: DL380 External SCSI (VHDCI) concern

 
SOLVED
Go to solution
Jay Gomez
Occasional Advisor

DL380 External SCSI (VHDCI) concern

Hi to all,

I have a DL380 G3 and G2 servers with 6 HDD attached to each of the server and configured as RAID 1 and RAID5 respectively using the integrated smart array controller.My concern is that,is it possible for me to attached external tape drive or a tape library on the external scsi (VHDCI)of the DL380?
Will it function without affecting the RAID set or the logical drives configured on the server?
Thanks in advance..
3 REPLIES 3
SURESHKUMAR.P
Advisor
Solution

Re: DL380 External SCSI (VHDCI) concern

Hi Jay Gomez,

I thing your Tape Library has been connected to Ext.Scsi Controller,So it is not distrup to you Existing Array configuration. don't worry you can proceed.

ie.

RAID1 : PUN0,PUN1
RAID5 : PUN2,PUN3,PUN4,PUN5

Ext.Scsi:Tape library.
insuch case library not detected pls. check the combination of IRQ(0~15)

If you want check functionality of Tap drive, could you download and installed the Tape driver utillity and check the performance of the drive.

Tape drive library utility download ulr:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locale=en_USтМй=English+%28US%29&basePartNum=COL1977&locBasepartNum=co-24451-1&os=Microsoft+Windows+2000+Server&tech=Diagnostic&pnameOID=12207&prodTypeId=12169&prodSeriesId=63995

Thanks and Regards
Suresh.P
Stephen Kebbell
Honored Contributor

Re: DL380 External SCSI (VHDCI) concern

Hi,

the external VHDCI connector is controlled by the Smart Array 5i controller. A Standalone tape drive is supported (as long as your internal drive cage is configured for simplex). Autoloaders and Libraries are NOT supported. For those devices you would need a separate PCI SCSI Controller.

Regards,
Stephen
Oleg Koroz
Honored Contributor

Re: DL380 External SCSI (VHDCI) concern

Try to get optional SCSI controller 66/66 or 64/133 for all External non-Array devices
Try to keep split for bus load also it's recommended for not hot plug tape drive use regular SCSI cards
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=155595-001
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=129281-001
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=348759-001
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=272653-001