HPE Community
ProLiant Servers (ML,DL,SL)
1753539 Members
5120 Online
108795 Solutions
New Discussion

Re: DL380 G2 Drives Fail

 
Marcus Hodson
New Member

‎04-07-2008 05:09 AM

‎04-07-2008 05:09 AM

DL380 G2 Drives Fail

I have a DL380 G2 with 5 Ultra3 drives in 2 arrays. Over the last 10 weeks, I have had 8 drive failures across 3 of the drives, which have been solved by reseating, although I did replace one drive.
I have just upgraded drivers and firmware, and on restart the eventvwr shows an error on aic78xx1.
Does the SmartArray 5i need reconfiguring or replacing? How can I troubleshoot this problem?
I attach the ADU output
0 Kudos
Reply
1 REPLY 1
KarloChacon
Honored Contributor

‎04-07-2008 05:55 AM

‎04-07-2008 05:55 AM

Re: DL380 G2 Drives Fail

hi

that's the source "aic78xx1"? right?

what is the event id?

ADU shows normal information that the logical drive is in rebuilding process

regards
Didn't your momma teach you to say thanks!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.