HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G2 - SmartArray5I

 
butter
Occasional Contributor

DL380 G2 - SmartArray5I

I have multiple servers that after I reboot them the array controller quits working. Sometimes I can take it out and reset it and it will work sometimes powering on/off the server multiple times fixes it and sometimes it never works again.

I have reset every major component from memory, processor, redundant fans, etc.

*** I have all the latest bios, etc updates on these servers.

I have a hard time believing that 6-8 servers all have bad array controllers in them.

Anybody experience this issue before?

2 REPLIES
Oleg Koroz
Honored Contributor

Re: DL380 G2 - SmartArray5I

Mickey Agee
Occasional Contributor

Re: DL380 G2 - SmartArray5I

I had a simular problem. But mine was the 6400 Raid Controller Card. Are you sure you dont have a card in their? The 5i is integrated. My problem ended up being all my cards were coming loose. You have to get the retainer clips that holds the cards securely to the motherboard. Once I did that my controller card problems went away.

Hope this is helpul.