ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G2 Temperature Status Change (8030):

 
Colin Patterson_1
Frequent Advisor

DL380 G2 Temperature Status Change (8030):

One of our servers has started reporting a tem change on the 4L6i disk cab on the slot 0 onboard array controller. a disk array is connected to port2. It shows the status as "failed" on the HPsim alert but the server does not shut down.
Location: Slot 0
Vendor: COMPAQ
Model: PROLIANT 4L6I
Serial Number:
Status: failed

The OS logs show the fault to on Port1 ?? I've asked for the firmware to be updated as this all started shorly after a software upgrade. Nothing is running hot. I've attached the ADU log. Is the temp sensor on the MB or scsi backplane? any help appreciated.
Is there anything they can't do ??