HPE Community
ProLiant Servers (ML,DL,SL)
1753830 Members
9308 Online
108806 Solutions
New Discussion

Re: DL380 G2 - U320 HBA - SLES 10 sp2

 
tmish
Occasional Advisor

‎12-02-2010 05:18 AM

‎12-02-2010 05:18 AM

DL380 G2 - U320 HBA - SLES 10 sp2

I have an issue where our dl380 during post does not see a ultrium 960 1/8 autoloader. During post I see "MPT ROM no supported devices found".

If I boot into SLES and scan for new devices, the autoloader is found.

The ROM version show 5.05.21 LSI Logic.

Any suggestions would be appreciated.
Thanks,
Tracy
0 Kudos
Reply
1 REPLY 1
Suman_1978
HPE Pro

‎12-07-2010 11:45 PM

‎12-07-2010 11:45 PM

Re: DL380 G2 - U320 HBA - SLES 10 sp2

Hi,

POST error message: "MPT Boot ROM, No Supported Devices Found"

Cause: There are no bootable devices connected to the SCSI controller (like a tape drive).

Workaround: This is not an error message, this message is normal if there are no bootable devices attached to the LSI SCSI controller. The message will appear on boot if there are no devices attached to the controller, or if non-bootable devices are attached (like a tape drive).

I work for HPE.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.