ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G3 CD-ROM Tray

Amanda Pollner
Occasional Contributor

DL380 G3 CD-ROM Tray

This is really more of a nuisance than a problem. The CD-ROM tray in our server keeps popping out. The server can go days untouched and we'll walk in and the CD tray will be sticking out. I don't see any unusual messages in the event logs...any ideas?
2 REPLIES
Chris Saindon
Valued Contributor

Re: DL380 G3 CD-ROM Tray

Hello Amanda,

Just a wild guess but it's probably something from the O/S calling it. Check your scheduled tasks. Look at your virus scanner, if you have it set to scan a CD-ROM, that's a good bet.

Only other thing I can recommend is to run the Firmware Updates for the server and make sure it's not some firmware/driver conflict.


Firmware Maintenance CD
http://h18023.www1.hp.com/support/files/server/us/download/24777.html

Chris
Black holes are where God divided by zero - Steven Wright
Pieter 't Hart
Honored Contributor

Re: DL380 G3 CD-ROM Tray

if the real cause cannot be found, removing the drive may be an option.
after all it is hot-swappable, so when needed you can put in in place.

Pieter