DL380-G3 NC7781 integrated Speed/Duplex on Netware 6 SBS

[solvox]

How to set speed to 1000 Half duplex. After loading driver :
load q57 FRAME=Ethertsm_802.2 speed=1000HD ...

server display only AUTO
10HD
10FD
100HD
100FD
1000FD
there is no option 1000HD.

When I set speed on switch to 1000HD netware response with:
7-05-2004 3:54:58 pm: Q57-7.5-0
Q57-NW-10794-Adapter 2-Board 3:
Slot 10017 Adapter has Link @ 1000 Mbs, Half

but there is no any communication after that.

Thanks

[Symen]

Could I first ask you why you would want to set your adapter to 1000HD?
are you connected to a hub or something?

[solvox]

Because Clipper application.

10FD, 100FD, 1000FD generate "Unrecoverable error 410,415,416"

10HD, 100HD works fine.

[Symen]

Q57 Does not support 1000HD. It's either 100FD/HD, or 1000FD you'll need to choose from. Setting your switch to an unsupported speed/duplex mode will prevent you from connecting. This is normal behaviour for the NC7781.