HPE Community
ProLiant Servers (ML,DL,SL)
1753523 Members
9761 Online
108795 Solutions
New Discussion

Re: DL380 G3 Raid 1 config after having installed Windows 2003 Server

 
LAMBINON Philippe
Occasional Contributor

‎03-15-2004 06:53 PM

‎03-15-2004 06:53 PM

DL380 G3 Raid 1 config after having installed Windows 2003 Server

Hello,

A DL380 G3 has been installed with one 72GB disk containing Windows 2003 Srvr and some data. A second disk has been added and HP Array Configuration Utility (ACU) installed on Windows 2003. Array A (containing first disk with data) has been expanded. Array A contains now two disks. I've the ability to change level to Raid1+0. Does it mean "mirror" disk ? Or expanding Stripe to one Logical Volume (144Gb) ?

Thanks for answer

Regards

Philippe
plambino@csc.com
0 Kudos
Reply
1 REPLY 1
Simon Hallewell
Advisor

‎03-16-2004 11:40 AM

‎03-16-2004 11:40 AM

Re: DL380 G3 Raid 1 config after having installed Windows 2003 Server

Raid 1+0 refers to the HP/Compaq method of creating a 'mirror' it is actually a striped mirror set which provides a little better performance than a standard mirror but other than that is functionally the same.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.