ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G3 Unrecoverable Intermodule Bus Errors

John Venables_2
Occasional Contributor

DL380 G3 Unrecoverable Intermodule Bus Errors

Hiya need some advice on 2 servers experiencing the same problems. These are experiencing the above errors and now on bootup server intermittently goes into a hung state and the CD-ROM flickers very quickly and thats as far as it gets.

Anyone any ideas
2 REPLIES
Sean Marshall_1
Frequent Advisor

Re: DL380 G3 Unrecoverable Intermodule Bus Errors

Well the first thing I would try is removing all PCI cards from the unit. If this fails to get you past the error, try clearing NVRAM (look at the inside panel of the server for location of the maintenance switch, throw switch 6 to the on position and power on the server, wait about a minute then power off the server and return the switch to the off position). If that doesnt help bring the server to a complete minimum config (1 proc, 2 sticks of ram etc) If that doesnt work try to flash the firmware of the system board.

Hope that helps

Raheel Ahmad
Occasional Visitor

Re: DL380 G3 Unrecoverable Intermodule Bus Errors