ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G3 and SA 6402

 
Sambo_1
Occasional Contributor

DL380 G3 and SA 6402

Hello Chaps,

Currently we have a DL380 G3 and have recently put in a Smart Array 6402 controller in the box. Now I want to use the new SA6402 rather than the integrated SA 5i. I understand I have to plug the cable from the new SA6402 into the the existing internal SCSI port on the backpane. Since I want to use the full Ultra-320 speeds, can you please let me know the type of cable or even better the product code of the internal scsi cable that I need. I did look at 166389-B21 but not sure if this support Ultra-320. All my hard drives are Ultra-320 and running at 15K.

Cheers,

Sam
6 REPLIES
KarloChacon
Honored Contributor

Re: DL380 G3 and SA 6402

this is what you need

289567-001
taken from
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00065010/c00065010.pdf


for price
http://partsurfer.hp.com/cgi-bin/spi/main

regards
Didn't your momma teach you to say thanks!
Bhavnish
Frequent Advisor

Re: DL380 G3 and SA 6402

Hi Sam,

Go for 289567-001 -- SCSI cable kit includes SCSI cable, short, 68 pin, SCSI cable, long, 68 pin System cable, and SCSI, 50 pin cable.

I also attached the diagram for cabling, take a look.

Bhavnish
Everything is Possible+++
KarloChacon
Honored Contributor

Re: DL380 G3 and SA 6402

Bhavnish

I liked the diagram where did you get it?
share the link

regards
Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: DL380 G3 and SA 6402

dont worry I already got it

page 102 and 1003
http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_303130-003/TPM_303130-003.pdf

regards
Didn't your momma teach you to say thanks!
anishvertex
Occasional Advisor

Re: DL380 G3 and SA 6402

Hi Sam,

DL380G3 system can be operated in single channel (using either the embedded Smart Array 5i Plus controller or a PCI-based controller) or dual channel (with the first 2 drives on 1 channel, driven by the Smart Array 5i Plus controller and 4 drives driven by either the Smart Array 5i Plus or a PCI-based controller)

SCSI Configuration Kit (Kit Includes duplex drive backplane terminator and 2 long SCSI cables) which normaly used in DL380 G4 with SA6400 controller that support U320

Anish
anishvertex
Occasional Advisor

Re: DL380 G3 and SA 6402

Hi Sam
DL380G3 can be operated in single channel (using either the embedded Smart Array 5i Plus controller or a PCI-based controller) or dual channel (with the first 2 drives on 1 channel, driven by the Smart Array 5i Plus controller and 4 drives driven by either the Smart Array 5i Plus or a PCI-based controller)

SCSI Configuration Kit (Kit Includes duplex drive backplane terminator and 2 long SCSI cables) which normaly used in DL380 G4 with SA6400 controller P/N 364471-B21.