HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

DL380-G4 6i Controller Performance

Scout Bender
Occasional Advisor

DL380-G4 6i Controller Performance

We received (2) DL380-G4s and both systems take approximately 10mins to initalize 146gb 10k drives, if I pull the drives out the system boots normally in less than 2 mins w/36gb 15k drives. Both servers do this when loaded with SmartStart 7.10 or 7.20.

The 6i firmware has been backleveled and upgraded 2.34 <> 2.36 and using the latest Array Config 7.20.x

This is unacceptable performance - anybody have a fix available.

Oleg Koroz
Honored Contributor

Re: DL380-G4 6i Controller Performance

As a rule there should be no difference in time for HW detection (+/-), verify Firmware updates for Drives