DL380 G4 DAT72

[Harry Meijerink]

Confiuration DL380 G4 5x32Gb raid5 + int.DAT72.
Installed SLES9, linux can't find the DAT.
During the boot the DAT is recognized.
Anybody any tips, installing a driver?
Or installing a second SCSI controller.
If a second controller is needed wich type.
Thansk in advance.

Harry

[Yaniv Klinger]

I have a similar problem

Do you have an answer by now ?

[Ameen Khan S_1]

Hi Harry,

Which version of Linux is installed on this server? Which SA controller are you using? If the Dat is getting detected while post then it could be the driver issue. http://h10018.www1.hp.com/wwsolutions/linux/products/storage/dat72-drivers-cert.html

Check the link above.

thanks

[Yaniv Klinger]

Hello Harry,

I'm sorry I got confused... I have windows
2000 server installed and not linux.
(maybe you can still help ??!!)
I'm running Smart Array 6i and trying to connect to the DAT72 to make an image
on a tape drive.
on the boot sequence I can see a detection of the tape but not while loading SCSI dos drivers?.
what do you think, is there a BIOS update I should run for the Array or maybe it is just a driver problem ?

Thanks
Yaniv

[Kevin Hand]

I have the exact same problem. Tape drive is seen during boot up but Linux can not see it. I want to use Red Hat Enterprise Linux ES Version 4 but have tried other versions to no avail.

I have placed calls with both HP and Red Hat and neither have come up with an answer as yet so any help would be appreciated.

Thanks

[ALee_2]

I have the same problem too. Have called HP support for over a week, still got no reply.

I added an Adaptec SCSI controller, connect the tape drive to it. It just works very naturally.

[Yaniv Klinger]

Alee,
Do you mean to add another SCSI controller in addition to the Smart Array ?

[Tv_3]

Have anyone already installed Libarary and Tape tools?

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=406731&locale=en_US&taskId=135&prodSeriesId=406729&prodTypeId=12169

Can you update the firmware of the tape streamer?

You find the latest drivers on:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=316236&locale=en_US&taskId=135&prodSeriesId=316234&prodTypeId=12169

On with scsi channel and scsi ID the Tape Streamer is installed?

[Yaniv Klinger]

The Tape is on: Port 1, ID 5
according to the boot messages.
Maybe it is related to the different port the Smart Array 6i has for the tape?

[ALee_2]

Yes, we added a PCI/X SCSI controller (Adaptec) in addition to the smart array.

I cannot make the tape work with smart array with Linux. Have not tried Windows. Any one has better experience in Linux?

May be I try Port 1 channel 5 later.

Thanks.