HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G4 - Error When Teaming NC7782

 
SOLVED
Go to solution
JimYoung
Occasional Contributor

DL380 G4 - Error When Teaming NC7782

When teaming the 2 onboard NICS - I get a red cross on one of the connections. The error message received is RX Hearbeat Failure. I tried teaming with a port on another card NC7771 and get the same message. Any Ideas as to what may be causing this?

Thanks in advance
Jim
2 REPLIES
Rob Holden
Occasional Advisor
Solution

Re: DL380 G4 - Error When Teaming NC7782

Hi Jim,

Check out the following link

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_CO041216_CW01

Not sure if you are using Windows 2000 or 2003 but the following links will get you to the site to update your version of the Teaming Software.

To prevent a NIC Team from generating a fault during initialization due to a RX path failure and setting the IP address to 0.0.0.0, upgrade to the HP Network Configuration Utility 7 for Windows Version 7.80 (or later).

The latest version of the HP Network Configuration Utility for Microsoft Windows 2000 is located at the following URL:

http://h18023.www1.hp.com/support/files/server/us/locate/2042.html

The latest version of the HP Network Configuration Utility for Microsoft Windows 2003 (any edition) is located at the following URL:
http://h18023.www1.hp.com/support/files/server/us/locate/5109.html

To prevent a NIC Team from generating a fault during initialization due to a RX path failure and setting the IP address to 0.0.0.0, upgrade to the HP Network Configuration Utility 7 for Windows Version 7.80 (or later).

The latest version of the HP Network Configuration Utility for Microsoft Windows 2000 is located at the following URL:
http://h18023.www1.hp.com/support/files/server/us/locate/2042.html

The latest version of the HP Network Configuration Utility for Microsoft Windows 2003 (any edition) is located at the following URL:
http://h18023.www1.hp.com/support/files/server/us/locate/5109.html

Rob
JimYoung
Occasional Contributor

Re: DL380 G4 - Error When Teaming NC7782

Thanks for the response. Traced the problem to a faulty patch cable.