ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G4 SBS2008 install problem

 
Micah Etheridge
Occasional Visitor

DL380 G4 SBS2008 install problem

We acquired a DL380 and tried to install SBS2008 standard. Everything went fine until the reboot and then it just reboots went it gets to the "crcdisk" driver. Then we tried to use the SmartStart CD and it does the same thing.

Has anyone had this problem or does anyone know how to fix it?
3 REPLIES

Re: DL380 G4 SBS2008 install problem

Hi,

Before all hardware firmware update and try again.

Smart Update Firmware DVD
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=397634&prodNameId=3288132&swEnvOID=4037&swLang=8&mode=2&taskId=135&swItem=MTX-a69a789f6bfc4b0fbe2d84c7c6

regards
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Micah Etheridge
Occasional Visitor

Re: DL380 G4 SBS2008 install problem

Tried the firmware update and that did not work. The first time that windows comes up I get a blue screen but it goes by so fast you can't see the numbers. Tried the repair part of MSSBS2008 and it says there is a start up error and it can't fix it.
P Muralidhar Kini
Honored Contributor

Re: DL380 G4 SBS2008 install problem

Hi Micah,

Is SBS2008 standard version supported on DL380 G4?

The following link related to SBS2008 lists only DL380 G5
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01479108/c01479108.pdf?jumpid=reg_R1002_USEN

Regards,
Murali
Let There Be Rock - AC/DC