ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G4 - can't build it with RDP

Pat Ennis
Occasional Visitor

DL380 G4 - can't build it with RDP

We've a DL380 G4 which we can't build with RDP - we've built G3's, G2's etc. with no problems - is the something obvious I should be modifying?
6 REPLIES
Michael Williams_6
Trusted Contributor

Re: DL380 G4 - can't build it with RDP

The only RDP I know of is Remote Desktop Protocol, which I think is Microsoft's version which needs an OS to run...

So as this is highly unlikely to be what your problem is, can you tell us what RDP is?
Pat Ennis
Occasional Visitor

Re: DL380 G4 - can't build it with RDP

Sorry if RDP caused confusion - It's HP's Rapid Deployment Pack - based on Altris and used to build servers with scripts rather than a manual CD swapping process.
Michael Williams_6
Trusted Contributor

Re: DL380 G4 - can't build it with RDP

Then I regret to say I haven't got a clue!

We use ghost images!
Pat Ennis
Occasional Visitor

Re: DL380 G4 - can't build it with RDP

We've found an article citing the version of smartstart and RDP as the problem - our versions are 7.0 and 1.5 respectively - we're going to upgrade to 7.10 and 1.6 to see if this was the problem.
Pat Ennis
Occasional Visitor

Re: DL380 G4 - can't build it with RDP

We've had some problems installing the upgrade to RDP 1.6. The integration module part failed for some reason - it stops before any files are copied - no error message is given. Anybody experience this?

Re: DL380 G4 - can't build it with RDP