ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G4 cannot get into iLO during post or access it via LAN

 
Ondra_pth
Occasional Contributor

DL380 G4 cannot get into iLO during post or access it via LAN

Hello.

I have a problem with iLO (2 I think). When I start my DL380 G4 there is no message to press F8 to get into iLO settings during post. Neither I can access it via LAN even trough iLO port has link.

Is it possible to somehow disable iLO? Is there a way to reset to factory defaults? Do you know how to get into iLO settings on the machine? 

Thanks, O.

1 REPLY
Suman_1978
HPE Pro

Re: DL380 G4 cannot get into iLO during post or access it via LAN

Hi,

Can you access iLO through remote console, if yes then try this:
https://support.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0115522

You may also try the following:
Clear NVRAM from System Maintenance Switch.
Update iLO2 firmware to the latest available.

Thank You!
I am a HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //