ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G4 won't start and boot

 
Stanislav Krestyannikov
Occasional Visitor

DL380 G4 won't start and boot

Hello,

may be somebody has a same problems,
and know how that resolves.


When power cables plugged and power button pressed, all funs starts in
HIspeed mode, SCSI disks are works, no any beeps, no boot, and monitor still in switch off mode. But second led in the front panel is RED. That mean "internal error".
All parts are new.
I had changed memory, cpu, power supply.
There are no results.

my configuration
DL380 G4.
CPU - Xeon 2.8G
Memory - 4x 512 DDR2100
Power supply - 2x 400W
HDD - 6x 72Gb Seagate
CDROM&Floppy - 1x

2 REPLIES
Mark Matthews
Respected Contributor

Re: DL380 G4 won't start and boot

Hi Stanislav,

There should be a corresponding error LED lit up inside the server somewhere.
This should point you to the component that is faulty.

Thanks
Mark...

---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)
Oleg Mochkin
Trusted Contributor

Re: DL380 G4 won't start and boot

Try to erase system settings with System Maintenance Switch - SW6. (see Maintenance and Service Guide). If not resolve the issue contact with HP Tech Support to replace mainboard.
BR, Oleg.